If your DJI Ronin gimbal cannot be charged or its power indicator does not light up, you can read this article for reference.
Applicable Products: DJI RS 3 Mini,DJI RS 3 Pro,DJI RS 3,DJI RS 2,DJI RSC 2,Ronin-SC,Ronin-S1. Make sure that the output power of the charger is equal to or lower than the recommended power.
DJI RS 3 Mini: Fast charging is not supported. The recommended power is 10 W (5V, 2A).
DJI RS 3: It is recommended to use a charger that complies with the PD or QC 2.0 fast charging protocol and has a charging power of 18 W or less.
DJI RS 3 Pro: It is recommended to use a charger that complies with the PD or QC 2.0 fast charging protocol and has a charging power of 24 W or less.
DJI RS 2: It is recommended to use a charger that complies with the PD or QC 2.0 fast charging protocol and has a charging power of 24 W or less.
DJI RSC 2: It is recommended to use a charger that complies with the PD or QC 2.0 fast charging protocol and has a charging power of 18 W or less.
DJI Ronin-SC: The charger can be a 5V/2A charger.
DJI Ronin-S: It is recommended to use a charger that complies with the QC fast charging protocol and has a charging power of 24 W or less.
2. Check whether the ambient temperature meets the requirements for charging.
The recommended ambient temperature for charging is 5°C to 40°C (41°F to 104°F).
3. Press the power button to check whether the power indicator lights up:
If the battery is new, it is recommended that you charge it for at least 10 minutes before you power the gimbal on (this does not apply to DJI RS 3 Mini).
4. Check whether the battery level is higher than 95%.
If you start charging when the battery level is higher than 95%, it is normal that the battery does not charge. You can disconnect the charging cable, wait for a minute or use the gimbal until the battery level decreases to lower than 95%, and then charge the gimbal again.
If you have removed the battery from the hand grip, and then re-installed it and tried charging again, but it still did not charge, we recommend that you Request Repair Service Online to send the gimbal to the after-sales service center for inspection.